Journal Articles
Permanent URI for this collectionhttps://dspacenew8-imu.refread.com/handle/123456789/2069
Browse
3 results
Search Results
Item Validation of engine performance for tests on ballast water heat treatment using engine waste heat(International Journal of Marine Engineering Innovation and Research, 2017-12) Balaji, Rajoo.; Yaakob, Omar.; Koh, Kho King.; Adnan, Faizul Amri bin.; Ismail, Nasrudin bin.; Ahmad, Badruzzaman bin.; Ismail, Mohd Arif bin.Heat treatment has been considered as a suitable option for treatment of ballast water. Utilising the waste heat from the diesel engine fresh water and exhaust gases would be an economic option. For recovering the heat from the exhaust gases, heat exchangers are required to be placed in their flow path. The sea water coolant after recovering heat from fresh water has to be directed to this heat exchanger for sterilisation. For testing the effectiveness of these heat recoveries on species’ mortalities, a mini-scale system was arranged and tests were carried out. The engine output and other flow rates were maintained to achieve a temperature range of 55 to 80oC. Data was obtained from the sensors and probes fitted at relevant points. The engine performance was monitored with computerised control equipment. Operational data from five test runs were analysed and verified by two approaches. In the first approach, the heat recovered by the water was compared with the heat lost by the exhaust gases and the maximum variation was observed to be 3.4%. In the second approach, the input energies were computed using two different methods using data values of brake power, thermal efficiency, mass flows, calorific value and specific fuel consumption. A maximum variation of -11% was seen for only one test run, while for other tests the variation was between -0.7% to -1.7%. The values obtained from the connected probes and the computed results were thus validated and further tests on species were carried out.Item Exergy analysis of a medium size LNG tanker steam power plant(Annual technical volume, Marine engineering division board, 2016) Sinha, Rajendra Prasad.; Balaji, Rajoo.Exergy is the maximum work which can be obtained from a quantity of heat Q at temperature T1 received by a system interfacing with a surrounding environment at temperature T0. In other words from the received heat energy ‘Q’ a small portion fails to convert into useful mechanical work and is thus lost which we call exergy destroyed. The loss of exergy in this heat work exchange process lowers overall thermal efficiency of the plant. Exergy destruction is actually the result of irreversibility in various processes of the plant and can be estimated from the second law of thermodynamics as the product of ambient temperature T0 and the positive entropy change Δsi.e. (T0Δs). The common irreversibility which cause entropy rise are mechanical or hydraulic friction, heat transfer with a finite temperature difference and diffusion with a high gradient of concentration etc., as most of these are present in a physical plant. Exergy analysis gives an insight into the way energy flows in the system and helps to locate components of the plant with high irreversibility to effect design improvements. In this paper the authors conduct energy and exergy analysis of 30 MW dual fuel fired marine steam power plant of a typical medium capacity LNG tanker and identify components responsible for major exergy destruction. Effects of steam reheating to reduce irreversibility and potential utilization of the cold energy of boil off gas in the thermodynamic cycle has been studied with the result showing 2-4 % improvement in the overall exergy efficiency of the plant.Item A study of ballast water treatment using engine waste heat(Journal of The Institution of Engineers (India): Series C, 2019-04) Balaji, Rajoo.; Yaakob, Omar.; Koh, Kho King.; Adnan, Faizul Amri bin.; Ismail, Nasrudin bin.; Ahmad, Badruzzaman bin.; Ismail, Mohd Arif bin.Heat treatment of ballast water using engine waste heat can be an advantageous option complementing any proven technology. A treatment system was envisaged based on the ballast system of an existing, operational crude carrier. It was found that the available waste heat could raise the temperatures by 25 C and voyage time requirements were found to be considerable between 7 and 12 days to heat the high volumes of ballast water. Further, a heat recovery of 14–33% of input energies from exhaust gases was recorded while using a test rig arrangement representing a shipboard arrangement. With laboratory level tests at temperature ranges of around 55–75 C, almost complete species mortalities for representative phytoplankton, zooplankton and bacteria were observed while the time for exposure varied from 15 to 60 s. Based on the heat availability analyses for harvesting heat from the engine exhaust gases(vessel and test rig), heat exchanger designs were developed and optimized using Lagrangian method applying Bell–Delaware approaches. Heat exchanger designs were developed to suit test rig engines also. Based on these designs, heat exchanger and other equipment were procured and erected. The species’ mortalities were tested in this mini-scale arrangement resembling the shipboard arrangement. The mortalities realized were[95% with heat from jacket fresh water and exhaust gases alone. The viability of the system was thus validated.