Journal Articles

Permanent URI for this collectionhttps://dspacenew8-imu.refread.com/handle/123456789/2069

Browse

Author: search.filters.author.Mishra, DeepakSubject: search.filters.subject.Oil-paper insulation

Search Results

Now showing 1 - 4 of 4
  • No Thumbnail Available
    Item
    A novel and fast approach for sensing activation energy for reliable health assessment of power transformer /
    (IEEE, 2022-09-13) Mishra, Deepak
    Activation energy represents the average rate of interaction between aging by-products and cellulose. Activation energy is a crucial parameter that can be used to identify the remaining life of insulation in high voltage (HV) equipment. Existing noninvasive methods take a significantly longer time to sense activation energy for given insulation. This is primarily due to the volume of data required for such analysis, which generally takes significant time to measure. This work reports a noninvasive and effective approach to predict activation energy of oil–paper insulation using a dielectric response that is recorded for a very short span of time. The proposed method requires polarization current data sensed for a few seconds (15–20 s) to operate. The initial decay rate (DR) of the sensed data is found to be sensitive to the activation energy. This feature of the initial DR is utilized to sense the value of activation energy within a short duration. The proposed technique utilizes the current sensor (present within an electrometer) more efficiently. This facilitates the measurement of a highly accurate polarization profile and ensures reliable activation energy estimation. The proposed methodology has been successfully applied to data collected from a few real-life transformers. Reported results show that the suggested method provides satisfactory results with good accuracy.
  • No Thumbnail Available
    Item
    Importance of depolarization current in the diagnosis of oil-paper insulation of power transformer
    (IEEE, 2023-06-07) Kumar, Alok; Mishra, Deepak; Baral, Arijit
    Recently, Polarization Depolarization current (PDC) measurement is widely accepted time domain spectroscopy-based method for assessing the insulation condition. Various performance parameters like Dissipation factor (%tan δ ), Paper Moisture (%pm), Dielectric Adsorption Ratio (DAR), Polarization index (PI) etc. can be estimated by analyzing the PDC data. During field measurement various factors influences the recorded PDC data. As per existing literature, presence of low frequency noise, effect of temperature variation and influence of residual charge are common during field measurement. These factors significantly affect recorded polarization current and hence estimated performance parameters. Hence, analysis using recorded polarization current data may provide misleading information regarding insulation condition. Under such practical situation where polarization current is affected by above mentioned factors that generally observed during field measurement, depolarization current should be used for analysis of insulation condition. The depolarization current does not influence by such external factors. The present work shows the importance of depolarization current where polarization current is influenced by external low frequency noise and residual charge. The analysis firstly applied on sample prepared in the laboratory and then on data collected from real life in-situ transformers. The results obtained from the analysis shows that the data obtained from depolarization current is more reliable.
  • No Thumbnail Available
    Item
    Assessment of interfacial charge accumulation in oil-paper interface in transformer insulation from polarization-depolarization current measurements
    (IEEE, 2017-06-03) Mishra, Deepak; Haque, Nasirul; Baral, Arijit; Chakravorti, Sivaji
    Accumulation of interfacial space charge in oil-paper interface is a critical issue in insulation diagnostics of transformers. This interfacial charge mainly accumulates due to the conductivity difference of oil and paper. Accumulation of interfacial charge leads to localized field enhancement, which further leads to partial discharges and acceleration in the aging of insulation. Therefore, from the point of view of transformer insulation diagnostics, assessment of interfacial charge is very important. However, it is not easy to estimate interfacial space charge behavior from the transformer diagnostics methods currently in use. In case of Polarization-Depolarization Current (PDC) measurement, a well known method for transformer condition monitoring, the effect of interfacial charge is reflected in the non-linearity of current response during polarization and de-polarization. During de-polarization process, a part of the interfacial charge accumulated during polarization period is absorbed by the electrodes producing a current, which is difficult to separate using conventional linear dielectric theory. In this paper, an attempt has been made to separate this current component from de-polarization current through considering charge de-trapping mechanism. Terming this current component as de-trapping current, its relationship with other parameters of transformer insulation is discussed. The developed methodology has been applied on several practical transformers. It was observed that the time constant of de-trapping current is related to the paper conductivity, oil conductivity, dissipation factor and age of the insulation.
  • No Thumbnail Available
    Item
    A novel and fast approach for sensing activation energy for reliable health assessment of power transformer
    (IEEE, 2022-09-13) Mishra, Deepak; Baral, Arijit; Chakravorti, Sivaji
    Activation energy represents the average rate of interaction between aging by-products and cellulose. Activation energy is a crucial parameter that can be used to identify the remaining life of insulation in high voltage (HV) equipment. Existing noninvasive methods take a significantly longer time to sense activation energy for given insulation. This is primarily due to the volume of data required for such analysis, which generally takes significant time to measure. This work reports a noninvasive and effective approach to predict activation energy of oil–paper insulation using a dielectric response that is recorded for a very short span of time. The proposed method requires polarization current data sensed for a few seconds (15–20 s) to operate. The initial decay rate (DR) of the sensed data is found to be sensitive to the activation energy. This feature of the initial DR is utilized to sense the value of activation energy within a short duration. The proposed technique utilizes the current sensor (present within an electrometer) more efficiently. This facilitates the measurement of a highly accurate polarization profile and ensures reliable activation energy estimation. The proposed methodology has been successfully applied to data collected from a few real-life transformers. Reported results show that the suggested method provides satisfactory results with good accuracy.