Mersenne beam-compressor with field-flattener optics as main telescope design for extremely large telescopes and telescope arrays /

Abstract

The Mersenne beam-compressor is the fundamental arrangement for two mirror reflecting telescopes. The Mersenne beam-compressor consists of two confocal paraboloids. The design produces an aberration-free, collimated output beam, which makes it easy to relocate the beam to any distant location. This property of Mersenne beam compressors makes them near-ideal for telescopes with requirements for ultra-stable instruments and interferometric applications. The only problem against such application is the Petzval field curvature that is induced in the output beam. This becomes very pronounced at very high compression ratios, which are required for interferometry with large aperture telescopes. The high compression ratio is a problem because, such large aperture telescopes are also required to deliver good performance at Nasmyth and Coude locations, to be feasible. This is not possible at high compression ratios using conventional design of Mersenne beam-compressor, due to prohibitively strong field curvature. Here, we propose powered and un-powered field-flattener optics to address the problem of field curvature in Mersenne beam-compressor. After passing through this set of optics, the output beam is completely aberration free. This arrangement can produce very high compression ratios, which are useful for various special applications. We also illustrate the performance of such a system using example designs. The performance analysis shows that such a design can give considerably high performance at distant locations of foci as compared to existing relay systems.